rdt('init', 'a2_er8w1hjthqbd', { email: '', externalId: '', idfa: '', aaid: '', });
top of page

✓ California Licensed Contractor

✓ CSLB #964965

✓ Family-Owned & Operated

✓ Fully Insured

✓ Serving California Homeowners Since 2014

Solar photos.avif

- ONE STOP SOLAR AND ROOFING IN SAN MATEO COUNTY

One Stop Solar and Roofing in Burlingame, CA

Green Conception serves Burlingame homeowners in ZIP 94010 with solar installation, roof replacement, and repairs backed by active CA licensing and San Mateo County permits.

Since 2014

Serving California homeowners

60+

Verified customer reviews

$0

Down · 100% financing available

Lic. 964965

CSLB licensed & insured
Green Conception Roof replacement

Built for this community

Solar and Roofing in Burlingame - Why DIY Falls Short

Burlingame homeowners love a project. Hardware stores near El Camino Real do fine business on weekends. But solar and roofing together? That's a different category. A DIY roof patch can void a manufacturer warranty. A self-permitted solar install can stall at PG&E interconnection for months. 94010 homes often have older framing and mixed roofing materials that need a trained eye before any panel goes up. Green Conception is the Best One Stop Solar and Roofing Service in this market because we check the roof first, then size the system. One crew. One permit package. One warranty covering both trades. No separate contractors arguing about who caused the leak.

The benefits

Why Bundling Solar and Roofing in Burlingame Saves Money

One Permit, Less Delay

San Mateo County permit packages for combined solar and roofing jobs move faster than two separate filings. 94010 homeowners typically save 5-10 business days on total project timeline.

Single Warranty Coverage

Splitting trades means split liability. Green Conception issues one warranty covering roofing materials and solar hardware so disputes about leak sources don't fall on you.

Roof-Ready Solar Design

Panels installed on a failing roof get removed and reinstalled later - at full cost. Checking the deck first in Burlingame's fog-heavy climate prevents that expensive repeat visit.

PG&E Interconnection Done Right

PG&E interconnection paperwork trips up DIY installs constantly. We handle the NEM 3.0 application, utility coordination, and inspection scheduling so nothing stalls at the utility stage.

One Crew On Your Property

Fewer vendors means fewer scheduling gaps, fewer strangers on your roof, and a faster punch-list close. Most Burlingame jobs wrap without a second mobilization.

Accurate Load Calculations

Older 94010 homes often have undersized panels and dated electrical. We check actual consumption data before sizing your solar array - not generic square-footage estimates.

01

Roof and Site Inspection

We check decking, flashing, gutters, and attic ventilation. Burlingame's coastal fog accelerates moisture damage - we find it before it becomes a warranty issue.

02

Permit Filing with San Mateo County

Combined roofing and solar permits filed at once. San Mateo County residential permits typically clear in 3-5 business days, keeping the project on schedule.

03

Roofing Installation First

New underlayment, flashing, and shingles or tile go on before any racking. 94010 homes get a weather-tight roof before the solar phase begins.

04

Solar Array Installation

Racking, panels, inverter, and disconnect installed to California Fire Code setback requirements. We pull string data on every panel before closing the array.

05

Inspection and PG&E Activation

City inspection, PG&E interconnection sign-off, and system activation handled by our team. You get a written commissioning report and warranty documents the same day.

How it works

How Green Conception Runs a Burlingame Solar and Roofing Job

Every job in 94010 starts with a roof-first inspection. Burlingame's fog belt climate accelerates granule loss and moss growth, so we document deck condition before any solar conversation happens. From there we pull a combined permit from San Mateo County - permits typically take 3-5 business days for residential projects here. Installation runs roofing first, solar second, in a sequenced schedule that keeps your home dry throughout. PG&E interconnection paperwork goes in parallel. Final city inspection closes the permit. Top One Stop Solar and Roofing provider means no handoffs, no gaps, and no separate contractors showing up on different weeks wondering what the other crew did.

More from Green Conception

More Services for Burlingame Homes

Tesla Ev Level 2 charger.jpg
Green-Conception_panel-replacement_section_roof-2.webp
pexels-hansmiddendorp-11784496.jpg

Gutter Replacement and Drainage

Burlingame's mature tree canopy and heavy winter fog create serious gutter load. Green Conception replaces deteriorated gutters, installs leaf guards, and resets downspout drainage away from foundations - jobs that often make sense to bundle with a roofing contract already underway.

Solar Panel Installation

A Level 2 charger becomes far more valuable paired with rooftop solar. We install residential solar built to work alongside your charger — so your vehicle runs on energy your home generates. We handle permitting, design, and installation for both systems together.

Attic Insulation and Ventilation

Poor attic ventilation in older 94010 homes drives up PG&E cooling costs and shortens roofing material life. Green Conception installs baffles, ridge vents, and blown insulation while the roof is already open - no second mobilization needed.

- Why us

Why 4S Ranch Homeowners Choose Green Conception

Licensed Contractors

Every Level 2 charger installation in 4S Ranch is completed by a licensed electrician. That matters for your safety, your permit, and your home-insurance policy.

Local Knowledge 

We pull all required permits for 4S Ranch and San Diego County on every single project. An unpermitted charger creates real problems at resale — ours will not.

Warranty

You get a written quote before work begins — charger, circuit, any panel work needed, and permits. No deposit required. What we quote is what you pay.

No Deposit Required

We don't ask for money upfront. Written quote, no-obligation estimate, and no deposit until materials are ordered. Most Burlingame homeowners get a written scope within 48 hours of the free inspection.

Free Roof and Solar Inspection

One project manager handles permitting, scheduling, and inspection coordination. No calls bouncing between a roofing sub and a solar sub. One person owns the job.

solar installer in a work.jpg

Roof First, Then Solar - Every Time in Burlingame

Burlingame's housing stock skews older. A lot of 94010 roofs were last touched before solar was even an option here. Putting panels on a roof with 5 years of life left is an expensive mistake. Green Conception sequences every job to eliminate that risk.

Deck Integrity First

No panel goes up until the deck passes our inspection.

Fog Belt Material Selection

Fog Belt Material Selection

NEM 3.0 System Sizing

Battery pairing recommendations come with every solar proposal now.

Fire Code Setbacks Built In

Fire Code Setbacks Built In

Permit-Closed Before We Leave

We don't consider a job done until the permit closes.

"In Burlingame I keep seeing roofs that should've been replaced before the panels went on. We fixed that by making the roof inspection non-negotiable - no exceptions, regardless of how new the homeowner thinks the roof is."

— Nick K. · Founder

Green Conception Serving Burlingame, CA - ZIP 94010

Green Conception has worked throughout Burlingame's residential neighborhoods - from the older Craftsmans near downtown to the ranch-style homes closer to the Bayshore. Most jobs in 94010 involve roofing material that's overdue for replacement, and solar systems that get properly sized only after the deck is confirmed solid. We pull San Mateo County permits, coordinate PG&E interconnection, and close every job with a final inspection on record.

— Common questions

Burlingame Solar and Roofing Questions - Answered Directly

Does Green Conception handle both solar and roofing together?

Yes - Green Conception manages solar and roofing under a single contract in Burlingame. One permit package covers both trades, one crew handles the installation sequence, and one warranty covers the finished work. No separate contractors, no coordination gaps between roofing and solar phases.

How long do San Mateo County permits take for this work?

San Mateo County residential permits for combined solar and roofing projects typically take 3-5 business days. Green Conception files the combined application at once so roofing and solar don't require separate review queues. Delays usually come from incomplete submittals - we avoid that with accurate documentation upfront.

What roofing materials work best in Burlingame's fog belt?

Burlingame's coastal fog and mild temperature swings favor materials with strong moisture resistance. Composition shingles with Class 4 impact ratings, concrete tile, and metal roofing all perform well in 94010. Green Conception recommends based on your existing roof structure, not just price point.

Will solar panels work given Burlingame's frequent fog?

Yes. Fog reduces output on overcast mornings but Burlingame still gets enough annual sun hours to make solar financially viable, especially with high PG&E rates. Green Conception sizes systems using local irradiance data, not statewide averages, so your production estimate reflects actual 94010 conditions.

Do you offer a free inspection before giving a quote?

Green Conception offers a free roof and solar site inspection for Burlingame homeowners with no obligation to proceed. The inspection covers deck condition, flashing, ventilation, and shading analysis. You get a written no-obligation estimate within 48 hours. No deposit is required to book the inspection.

How does PG&E interconnection work for Burlingame solar installs?

PG&E interconnection under NEM 3.0 requires a formal application, utility review, and approval before the system can export power. Green Conception handles every step of that process for Burlingame customers - application submission, response management, and final PTO coordination. Most approvals take 2-4 weeks after installation.

What is the typical cost range for a combined solar and roofing project?

Combined solar and roofing projects in Burlingame typically range from $28,000 to $65,000 depending on roof size, material choice, and system capacity. Bundling both trades under one contract usually saves $2,000-$5,000 compared to separate bids. Green Conception provides an itemized written quote so you see exactly where every dollar goes.

Is Green Conception licensed for both roofing and solar in California?

Green Conception holds active California contractor licenses covering both roofing and solar installation. Every Burlingame project also carries liability insurance and workers' compensation coverage. San Mateo County building inspectors see our permits regularly. License numbers are available on request and can be verified through the California Contractors State License Board.

Frequently asked questions

Verified · Real names · Real cities

What Burlingame Homeowners Say About Green Conception

Licensed California contractor · Fully insured · Real local crews · CSLB #964965
— Final step 

Free inspections this week.
Pick a slot — we'll take it from there.

Free site assessment · No deposit · CSLB #964965 · Experience you can rely on since 2014.

bottom of page