✓ California Licensed Contractor
✓ CSLB #964965
✓ Family-Owned & Operated
✓ Fully Insured
✓ Serving California Homeowners Since 2014
- RESIDENTIAL ROOF AND SOLAR COMBO IN LOS ANGELES COUNTY
Residential Roof and Solar Combo in Temple City, CA
Green Conception installs Residential Roof and Solar Combo systems across Temple City, CA 91780 - replacing aging roofs and adding solar in one coordinated project that saves time and money.
Since 2014
Serving California homeowners
60+
Verified customer reviews
$0
Down · 100% financing available
Lic. 964965
CSLB licensed & insured
— Built for this community
Why Temple City Homes Need a Roof and Solar Combo
Temple City is full of mid-century ranch homes and post-war cottages - flat pitches, original shingles, and roofs that were never built with solar in mind. 91780 sits deep in the inland valley where summer heat bakes asphalt and Santa Ana winds peel up edges by October. Putting solar on a roof that's 15 years old is a mistake most homeowners regret within three years. A Residential Roof and Solar Combo solves that by replacing the roof first, then mounting panels on fresh decking with proper flashing and penetration seals. No retrofits on top of worn material. No re-roofing around existing racking. Just one clean install done right, permitted through Los Angeles County, and backed by manufacturer warranties on both systems.
— The benefits
6 Real Benefits of a Roof and Solar Combo in Temple City
One Permit. Less Waiting.
Los Angeles County combines the roof and solar permit into one review cycle when submitted together. That trims 5-10 days off your project timeline versus pulling two separate permits back to back in 91780.
No Double Labor Costs
Scheduling a roofer and a solar crew separately means paying two mobilization fees and two site setups. A combined install in Temple City cuts that overhead and keeps the project on one invoice with one point of contact.
Fresh Decking Under Every Panel
Panels mounted on rotting or soft decking void most manufacturer warranties. New OSB or plywood under every mount means your solar system sits on solid material rated for 25-plus years in inland valley heat.
SCE Incentives Still Apply
SCE customers in 91780 can still access net metering credits and available rebate programs. Installing both systems in the same year may qualify you for a single tax credit calculation on the combined project cost.
Wind-Rated for Santa Ana Season
Santa Ana events hit the San Gabriel foothills hard. New roofing installed to current California code plus properly torqued solar racking keeps both systems from lifting when October gusts come through Temple City neighborhoods.
Cleaner Roofline. Better Resale.
Buyers in Temple City respond well to move-in-ready homes with solar already producing. A new roof plus a clean panel layout adds real value - not theoretical equity, but documented upgrades that show up on the listing.
01
Roof and Load Check
We check the existing decking, rafters, and attic ventilation before anything else. Structural issues get flagged before permit submission so there are no surprises mid-project in 91780.
02
Permit Package Submitted
We prepare and submit the combined roof and solar permit to Los Angeles County. Electronic submissions typically come back in 3-5 business days with a stamped set ready for the field.
03
Roof Tear-Off and Install
Old material comes off first. Decking gets inspected and replaced where soft or damaged. New underlayment and shingles or tile go down before any solar hardware touches the roof surface.
04
Racking and Panel Mount
Racking mounts into fresh rafters with sealed penetrations. Panels go on after the roof passes inspection. 91780 installs use wind-rated hardware designed for inland valley Santa Ana wind conditions.
05
Inspection and Grid Tie-In
City inspection closes the roofing and solar permits in one visit when possible. SCE interconnection paperwork follows, and most Temple City homeowners are producing power within a week of final sign-off.
— How it works
How a Residential Roof and Solar Combo Gets Done in Temple City
Every Residential Roof and Solar Combo project in Temple City follows a clear sequence - no guessing, no handoffs between strangers. First we check the existing roof structure and attic ventilation, then we design a solar layout matched to your actual electrical load and SCE rate schedule. Permits in Los Angeles County typically take 3-5 business days when submitted electronically with a complete package. After approval, roofing goes first - tear-off, decking inspection, new underlayment, and shingles or tile. Racking mounts go in before the final roof inspection so flashing can be signed off in one visit. Panels follow, then inverter and utility interconnection paperwork. Final city inspection closes the permit. Most Temple City projects finish in 4-6 days of actual work.
— More from Green Conception
Other Services We Offer
- Why us
Why Temple City Homeowners Choose Green Conception
Roof First, Solar Second - Every Single Time
A Residential Roof and Solar Combo done right isn't two projects stapled together. It's one system engineered from the decking up, with the solar layout planned before the first nail goes down and roofing material chosen to match the panel footprint.
"A roof and solar project that skips the structural check is just deferred trouble. We look at the decking, the rafters, and the attic before we quote a single panel - because fixing it after the array is mounted costs three times as much."
— Nick K. · Founder
Pasadena (91101)
San Marino (91108)
Sierra Madre (91024)
Monrovia (91016)
Green Conception Serving Temple City, CA 91780
Green Conception has worked throughout Temple City's established residential neighborhoods - the mid-century ranches along Primrose Avenue, the older homes near Oak Avenue Elementary, and the newer builds tucked into the east end of 91780. We've seen how inland heat and Santa Ana conditions affect roofing and solar performance in this specific ZIP, and we tailor every Residential Roof and Solar Combo to match the home's actual structure and SCE load profile. Active CA license, full insurance, and permitted work every time.
Arcadia (91007)
— Common questions
Residential Roof and Solar Combo FAQ for Temple City, CA
What does a combined roof and solar project cost in Temple City?
Most Residential Roof and Solar Combo projects in Temple City run between $28,000 and $55,000 depending on roof size, system capacity, and materials. That range includes permits, labor, and hardware. The federal tax credit offsets 30 percent, and SCE net metering reduces your payback period significantly. We provide a written quote with a line-item breakdown before any work begins.
Can I put solar on my existing roof without replacing it?
You can, but it's a risk most 91780 homeowners regret. If your roof has less than 10 years of life left, panels will need to come off when it fails - and re-roofing around existing racking costs more than doing it together. We'll check the roof condition during a free inspection and give you an honest answer.
How long does the full project take in Temple City?
Permits in Los Angeles County take 3-5 business days when submitted electronically with a complete package. Installation usually runs 4-6 working days for a standard single-family home in 91780. SCE interconnection approval after final inspection adds another 5-15 business days before your system is producing and credited.
Does Temple City require a separate roof and solar permit?
No. Los Angeles County allows a combined permit submission for a Residential Roof and Solar Combo when both scopes are included in the same application. Submitting together saves time and reduces inspection trips. Green Conception handles the full permit package so you don't have to track anything yourself.
What roofing materials work best with solar in inland valley heat?
Concrete tile and architectural asphalt shingles both perform well in 91780's inland valley climate. Tile runs cooler under panels and lasts longer in high-UV conditions, but it's heavier and may require a structural check. Shingles are lighter and faster to install. We recommend the right material based on your roof's current load capacity.
Will Santa Ana winds affect my roof or solar panels?
Santa Ana events bring sustained gusts and extreme dry heat through the San Gabriel Valley every fall. Properly installed racking rated to California wind zone requirements holds through these events when bolted into solid rafters. That's exactly why we check the structural framing before any racking goes down in Temple City.
Does Green Conception handle SCE interconnection paperwork?
Yes. SCE interconnection requires a specific application, stamped plans, and coordination with the utility after city inspection. Green Conception submits all of that on your behalf for every Residential Roof and Solar Combo project in 91780. Most interconnections are approved within 5-15 business days of final inspection sign-off.
Is a free inspection available before I commit to anything?
Yes. Green Conception offers a no-obligation free inspection for Temple City homeowners considering a Residential Roof and Solar Combo. We check the roof structure, measure your home's solar potential, and pull your SCE usage data to size the system correctly. You'll get a written quote with no deposit required before any work is scheduled.
